EN 10025-2 Higher-Strength Angle Steel for Structural and Load-Bearing Applications

S355JR angle steel is a higher-strength structural steel angle specified under EN 10025-2. With a minimum nominal yield strength of 355 MPa for the applicable thickness range, it is commonly specified for structural frames, load-bearing components, supports, and heavier fabrication where a higher-strength grade is required.

Supply is available for project purchasing, wholesale orders, distribution, and export requirements in commonly requested sections and thicknesses.

S355JR Angle Steel Supply

S355JR angle steel is supplied as hot rolled structural angle in commonly requested dimensions and thicknesses for fabrication and construction orders.

Available supply can include:

• S355JR angle bar in standard commercial sections
• Equal and unequal angle sections according to requirement
• Common and project-specified thicknesses
• Standard commercial lengths
• S355JR material to EN 10025-2
• Wholesale and project quantities
• Export orders for international delivery

Common sizes can be sourced according to the required section and quantity. Availability is confirmed against the specific purchasing requirement before quotation.

Where required, cutting or other order-specific processing can also be discussed for suitable quantities.

S355JR Angle Steel for Structural Applications

S355JR is selected when a structural project calls for higher-strength angle steel than conventional structural grades.

Typical applications include:

• Structural frames and load-bearing assemblies
• Heavy-duty structural supports
• Bracing and reinforcement
• Industrial steel structures
• Machinery and equipment frames
• Fabricated platforms and support systems
• Construction and engineering structures

For projects where section capacity is an important consideration, S355JR can provide a higher-strength material option while retaining the familiar angle-section format used in structural fabrication.

The grade is particularly relevant to engineering specifications that call for S355JR under EN 10025-2 rather than a lower-strength structural grade.

S355JR Angle Steel Specifications

S355JR is covered by EN 10025-2. The key mechanical requirements relevant to procurement include:

Property	S355JR
Standard	EN 10025-2
Minimum Yield Strength	355 MPa*
Tensile Strength	470–630 MPa*
Impact Energy	27 J at +20°C
Product Form	Hot Rolled Angle

*The applicable mechanical values depend on product thickness and the relevant requirements of EN 10025-2.

For purchasing, the required angle dimensions, thickness, length, and standard should be checked against the project specification before order confirmation.

S355JR Angle Steel Quality & Supply Requirements

For structural orders, the supplied material should correspond to the specified S355JR grade, section dimensions, thickness, and applicable standard.

Quality requirements can be reviewed according to the buyer’s specification, including:

• Grade and standard confirmation
• Section dimensions and thickness
• Length and dimensional tolerances
• Surface condition
• Mechanical properties
• Material test documentation where required
• Third-party inspection requirements when specified for the order

MTC can be provided where required by the purchasing specification. Additional inspection or documentation requirements should be confirmed before shipment so they can be incorporated into the order.

S355JR Angle Steel Packaging & Shipment

S355JR angle sections are normally prepared in bundles secured with steel strapping for handling, loading, and transportation.

Export packing can be arranged according to the shipment method and destination, with attention to:

• Bundle stability during handling
• Protection during loading and transportation
• Section identification and marking
• Containerized or other suitable shipment arrangements
• Required export documentation

Specific packing requirements can be coordinated when the buyer has particular handling, storage, or destination requirements.

S355JR Angle Steel Wholesale Supply

Wholesale S355JR angle steel can be sourced for steel distributors, stockists, fabricators, contractors, and project buyers.

For larger purchasing programs, different S355JR angle sections can be consolidated where practical, allowing buyers to cover multiple structural requirements through one supply arrangement.

Regular supply requirements can also be reviewed based on the buyer’s preferred section range and purchasing volume.

Request S355JR Angle Steel

Looking for an S355JR angle steel supplier for structural, fabrication, wholesale, or export requirements?

Send your required specification and destination to check available S355JR angle sections and arrange a suitable supply option for your order.

Q: What is your company’s main products/services?

A: We are a professional manufacturer for Carbon Steel, Alloy Steel and Profile products. We have the experience of steel business for more than 10 years and our products are exported to Mid East,South America,Southeast Asia,Africa,South and East Asia etc.

Q: Can I go to your factory for a visit?

A: Of course, we welcome customers from all over the world to visit our factory.

Q: What are your terms of payment?

A: 30% T/T deposite and 70% balance before shipment.

Q: What is your delivery time?

A: For stocks,we could transport the goods to loading port within 7 days after we received the deposit; For production,it usually takes about 15-30 days after receiving the deposit.

Q: Do you provide samples? Are they free or paid?

A: Samples are available for free,but the courier freight will be covered by customer account.

Q: Do you accept the third party inspection?

A:Yes, we fully accept ‌third-party inspections.

Q: Why should I buy from you not from other suppliers?

A: Integrating the superior resources of China’s steel industry, we provide customers with high-quality steel products at preferential prices, and can ensure that the goods are delivered to customers in a timely manner.

Q:How can you guarantee quality?

A: Always a pre-production sample before mass production;Always 100% inspected before shipment