CJM Steel Group Ltd.
Contact UsC.J.M.Stainless Steel Group Ltd
Monel 500 Plate
- OriginChina
- Delivery Time≥7 days
- DemandCustomizable
- StandardASTM, AISI, JIS, GB, DIN, EN
- MOQ 1 Ton
Product Description
Stock Display
Inspection and Packaging
Monel 500 Plate Description
Monel 500 is a high-strength nickel-copper alloy that contains approximately 65% nickel and 30% copper, along with small amounts of aluminum. This alloy is known for its excellent corrosion resistance and high mechanical strength, particularly in high-temperature environments. Monel 500 offers enhanced strength and oxidation resistance compared to Monel 400. It exhibits good resistance to corrosion in marine environments, high temperatures, and a variety of chemical exposures.
Product Parameters
| Product Name | Monel 500 Plate |
| Thickness | 0.3mm-200mm |
| Length | 2000mm, 2438mm, 3000mm, 5800mm, 6000mm, 12000mm, etc. |
| Width | 40mm-600mm, 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc. |
| Standard | ASTM, AISI, JIS, GB, DIN, EN, etc. |
| Surface | BA, 2B, NO.1, NO.4, 4K, HL, 8K, etc. |
| Certificate | ISO, SGS, BV |
| Production Technology | Hot Rolling, Cold Rolling |
Chemical Composition
| Nickel, minA | Copper | Al max | Manganese, max | Carbon, max | Silicon, max | Sulfur, max |
| 63.0-70.0% | 28.0% – 34.0% | 1.5-3.0% | 0.50% | 0.3% | 0.5% | 0.024% |
Mechanical Properties
| Condition (Temper) | Tensile Strength, min, psi (MPa) | Yield StrengthA(0.2 % offset), min, psi (MPa) | Elongationin 2 in. or50 mm, or4D, min,% | Rockwell Hardness(B Scale)b,c |
| Hot-Rolled Plate | ||||
| Annealed | 70000 (485) | 28000 (195) | 35 | – |
| As-RolledD,E | 75000 (515) | 40000 (275) | 25 | – |
| Hot-Rolled Sheet | ||||
| Annealed | 70000 (485) | 28000 (195) | 35 | – |
| Cold-Rolled Sheet | ||||
| Annealed | 70000 – 85000 (485 – 585) | 28000 (195) | 35 | – |
| Quarter-Hard | – | – | – | 73 – 83 |
| Half-Hard | – | – | – | 82 – 90 |
| Hard | 100000 (690) | 90000 (620) | 2 | – |
| Cold-Rolled Strip | ||||
| Annealed | 70000 – 85000 (485 – 585)F | 28000 (195) | 35F | – |
| Skin Hard | – | – | – | 68 – 73 |
| Quarter-Hard | – | – | – | 73 – 83 |
| Half-Hard | – | – | – | 82 – 90 |
| Three-Quarter-Hard | – | – | – | 89 – 94 |
| Hard | 100000 (690)F | 90000 (620)F | 2F | – |
| Spring Temper | – | – | – | 98 min |
Physical Performance
| Physical Performance | Units | Temperature in°C |
| Density | 8.80 g/cm³ | Room |
| Specific Heat | 0.385 Kcal/kg.C | 25° |
| Melting Range | 1300-1400°C | – |
| Modulus of Elasticity | 1.207 KN/mm² | 20° |
| Electrical Resistivity | 0.75 µΩ.cm | 20° |
| Coefficient of Expansion | 14.1 µm/m °C | 25 – 100° |
| Thermal Conductivity | 35 w/m-° K | 25° |
Scope of Application
Used in marine engineering, chemical and hydrocarbon processing equipment, gasoline tanks and fresh water tanks, crude oil distillers, degassing heaters, boiler feed water heaters and other heat exchangers, valves, pumps, shafts, accessories and fasteners, Industrial heat exchangers, chlorinated solvents, crude oil distillation columns, etc., chemical processing, pollution control, pulp and paper production; industrial and municipal waste treatment and acid natural gas recovery.
FAQ
Related products
Inconel 625 Coil
- OriginChina
- Delivery Time≥7 days
Inconel 718 Plate is a high-strength, heat-resistant alloy, ideal for high-temperature applications, offering excellent durability and corrosion resistance.
Galvanized Unequal Angle Steel
- OriginChina
- Delivery Time≥7 days
Stainless Steel Angle Steel Stainless steel angle steel is a long strip of steel with two sides perpendicular to each other. There are equilateral stainless steel angle steel and unequal stainless steel angle steel. The two sides of the equilatera…
Hastelloy C-22 Plate
- OriginChina
- Delivery Time≥7 days
Hastelloy C-22 Plate is a corrosion-resistant alloy, ideal for harsh environments, offering excellent resistance to pitting and stress corrosion.
A36/Q235/S235JR Carbon Steel Coil
- OriginChina
- Delivery Time≥7 days
A36 carbon steel coil is a versatile, low-carbon steel with excellent weldability, machinability, and strength, widely used in construction, manufacturing, and structural applications for its durability and cost-effectiveness.
loading…
已经是到最后一篇内容了！
MESSAGE：