EN 10025-2 S235JR Equal & Unequal Angle Steel for Wholesale and Export Supply

S235JR angle steel is a European structural steel angle supplied for construction, fabrication, equipment frames, supports, bracing, and general steelwork. Available in equal angle and unequal angle configurations, it can be sourced in commonly requested dimensions, thicknesses, and lengths for wholesale, distribution, and project orders.

Supply is arranged according to the required EN 10025-2 grade and dimensional requirements, with options for standard stock sizes and order-based sourcing.

S235JR Angle Steel Supply

S235JR angle steel can be supplied as S235JR angle bar in both equal-leg and unequal-leg profiles. The available range can be matched to structural drawings, fabrication requirements, or purchasing specifications.

Typical supply options include:

• S235JR equal angle for balanced structural support and framing
• S235JR unequal angle where different leg dimensions are required
• S235JR hot rolled angle for general structural and fabrication use
• Standard and project-specific lengths
• Common structural dimensions and thicknesses
• Bundled packing for domestic or export shipment
• Wholesale quantities for distributors, contractors, and fabricators
• Mixed sizes may be considered for suitable orders

S235JR angles are generally supplied to the applicable European dimensional and material standards, with the purchase specification determining the required grade, dimensions, tolerances, and documentation.

S235JR Angle Steel Specification

S235JR is specified under EN 10025-2.

Propiedad	S235JR
Estándar	EN 10025-2
Límite elástico	≥ 235 MPa*
Resistencia a la tracción	360–510 MPa*
Energía de impacto	27 J at +20°C
Product Type	Hot rolled angle
Section	Equal / Unequal

*Mechanical requirements vary according to the applicable thickness range and product specification. The purchase standard and supplied material documentation govern the final values.

S235JR Equal Angle and Unequal Angle

The main selection is between equal-leg and unequal-leg sections.

S235JR Equal Angle

Commonly requested sizes include combinations such as:

Talla	Espesor
25 × 25 mm	3–4 mm
30 × 30 mm	3–5 mm
40 × 40 mm	3–5 mm
50 × 50 mm	4–6 mm
60 × 60 mm	5–6 mm
75 × 75 mm	5–8 mm
100 × 100 mm	6–10 mm
150 × 150 mm	10–15 mm

The actual available range depends on the required section, thickness, quantity, and supply source. European angle ranges commonly include equal sections from approximately 20 × 20 mm upward, with larger sections available for structural orders.

S235JR Unequal Angle

Examples include:

• 40 × 20 mm
• 50 × 30 mm
• 60 × 40 mm
• 75 × 50 mm
• 100 × 50 mm
• 125 × 65 mm
• 150 × 75 mm

Unequal angles can help achieve the required structural arrangement while controlling section weight and connection geometry.

S235JR Angle Steel Applications

S235JR angle steel is commonly selected for general structural and fabrication requirements where a standard European structural grade is specified.

Los usos típicos son:

• Building steelwork
• Structural bracing
• Frames and supports
• Equipment and machinery frames
• Steel racks and shelving
• Fabricated platforms and supports
• Trusses and secondary structures
• General metal fabrication

The combination of standard angle geometry and S235JR structural properties makes the grade suitable for a broad range of conventional steelwork.

S235JR Angle Bar Supply for Export Orders

Orders for S235JR angle bar can be prepared for export shipment with bundled steel sections and suitable external protection for handling and transportation.

Depending on the order, buyers can specify:

• S235JR grade
• Equal or unequal angle
• Dimensions and thickness
• Standard length or required cutting length
• Total quantity
• Packing requirements
• Destination port
• Shipping terms

For distributors and international steel buyers, specifications can be reviewed before shipment to confirm that the supplied angle sections match the commercial and technical requirements of the order.

Request S235JR Angle Steel Supply

Necesita S235JR angle steel supplier support for a project, wholesale order, or regular distribution requirement?

Send the required size, thickness, length, quantity, and delivery destination. Availability can be checked for equal or unequal S235JR angles, and suitable supply options can be arranged according to your purchasing requirements.

P: ¿Cuáles son los principales productos/servicios de su empresa?

R: Somos fabricantes profesionales de productos de acero al carbono, acero aleado y perfiles. Tenemos la experiencia del negocio de acero por más de 10 años y nuestros productos se exportan a Oriente Medio, Suramérica, Asia sudoriental, África, Asia del sur y del este etc.

P: ¿Puedo visitar su fábrica?

R: Por supuesto, invitamos a clientes de todo el mundo a visitar nuestra fábrica.

P: ¿Cuáles son sus condiciones de pago?

R: 30% T/T depósito y 70% saldo antes del envío.

P: ¿Cuál es su plazo de entrega?

R: Para las existencias, podríamos transportar las mercancías al puerto de carga dentro de los 7 días después de recibir el depósito; Para la producción, por lo general toma alrededor de 15-30 días después de recibir el depósito.

P: ¿Proporcionan muestras? ¿Son gratuitas o de pago?

R: Las muestras están disponibles de forma gratuita, pero el flete de mensajería será cubierto por la cuenta del cliente.

P: ¿Aceptan la inspección de terceros?

R: Sí, aceptamos inspecciones de terceros.

P: ¿Por qué debería comprarles a ustedes y no a otros proveedores?

R: Integrando los recursos superiores de la industria siderúrgica de China, proporcionamos a los clientes productos de acero de alta calidad a precios preferenciales, y podemos garantizar que las mercancías se entregan a los clientes a tiempo.

P: ¿Cómo garantizan la calidad?

A: Siempre una muestra de pre-producción antes de la producción en masa;Siempre 100% inspeccionado antes del envío