EN 10025-2 Higher-Strength Angle Steel for Structural and Load-Bearing Applications

S355JR angle steel is a higher-strength structural steel angle specified under EN 10025-2. With a minimum nominal yield strength of 355 MPa for the applicable thickness range, it is commonly specified for structural frames, load-bearing components, supports, and heavier fabrication where a higher-strength grade is required.

Supply is available for project purchasing, wholesale orders, distribution, and export requirements in commonly requested sections and thicknesses.

S355JR Angle Steel Supply

S355JR angle steel is supplied as hot rolled structural angle in commonly requested dimensions and thicknesses for fabrication and construction orders.

Available supply can include:

• S355JR angle bar in standard commercial sections
• Equal and unequal angle sections according to requirement
• Common and project-specified thicknesses
• Standard commercial lengths
• S355JR material to EN 10025-2
• Wholesale and project quantities
• Export orders for international delivery

Common sizes can be sourced according to the required section and quantity. Availability is confirmed against the specific purchasing requirement before quotation.

Where required, cutting or other order-specific processing can also be discussed for suitable quantities.

S355JR Angle Steel for Structural Applications

S355JR is selected when a structural project calls for higher-strength angle steel than conventional structural grades.

Las aplicaciones típicas son:

• Structural frames and load-bearing assemblies
• Heavy-duty structural supports
• Bracing and reinforcement
• Industrial steel structures
• Machinery and equipment frames
• Fabricated platforms and support systems
• Construction and engineering structures

For projects where section capacity is an important consideration, S355JR can provide a higher-strength material option while retaining the familiar angle-section format used in structural fabrication.

The grade is particularly relevant to engineering specifications that call for S355JR under EN 10025-2 rather than a lower-strength structural grade.

S355JR Angle Steel Specifications

S355JR is covered by EN 10025-2. The key mechanical requirements relevant to procurement include:

Propiedad	S355JR
Estándar	EN 10025-2
Minimum Yield Strength	355 MPa*
Resistencia a la tracción	470–630 MPa*
Energía de impacto	27 J at +20°C
Forma del producto	Hot Rolled Angle

*The applicable mechanical values depend on product thickness and the relevant requirements of EN 10025-2.

For purchasing, the required angle dimensions, thickness, length, and standard should be checked against the project specification before order confirmation.

S355JR Angle Steel Quality & Supply Requirements

For structural orders, the supplied material should correspond to the specified S355JR grade, section dimensions, thickness, and applicable standard.

Quality requirements can be reviewed according to the buyer’s specification, including:

• Grade and standard confirmation
• Section dimensions and thickness
• Length and dimensional tolerances
• Surface condition
• Mechanical properties
• Material test documentation where required
• Third-party inspection requirements when specified for the order

MTC can be provided where required by the purchasing specification. Additional inspection or documentation requirements should be confirmed before shipment so they can be incorporated into the order.

S355JR Angle Steel Packaging & Shipment

S355JR angle sections are normally prepared in bundles secured with steel strapping for handling, loading, and transportation.

Export packing can be arranged according to the shipment method and destination, with attention to:

• Bundle stability during handling
• Protection during loading and transportation
• Section identification and marking
• Containerized or other suitable shipment arrangements
• Required export documentation

Specific packing requirements can be coordinated when the buyer has particular handling, storage, or destination requirements.

S355JR Angle Steel Wholesale Supply

Wholesale S355JR angle steel can be sourced for steel distributors, stockists, fabricators, contractors, and project buyers.

For larger purchasing programs, different S355JR angle sections can be consolidated where practical, allowing buyers to cover multiple structural requirements through one supply arrangement.

Regular supply requirements can also be reviewed based on the buyer’s preferred section range and purchasing volume.

Request S355JR Angle Steel

Looking for an S355JR angle steel supplier for structural, fabrication, wholesale, or export requirements?

Send your required specification and destination to check available S355JR angle sections and arrange a suitable supply option for your order.

P: ¿Cuáles son los principales productos/servicios de su empresa?

R: Somos fabricantes profesionales de productos de acero al carbono, acero aleado y perfiles. Tenemos la experiencia del negocio de acero por más de 10 años y nuestros productos se exportan a Oriente Medio, Suramérica, Asia sudoriental, África, Asia del sur y del este etc.

P: ¿Puedo visitar su fábrica?

R: Por supuesto, invitamos a clientes de todo el mundo a visitar nuestra fábrica.

P: ¿Cuáles son sus condiciones de pago?

R: 30% T/T depósito y 70% saldo antes del envío.

P: ¿Cuál es su plazo de entrega?

R: Para las existencias, podríamos transportar las mercancías al puerto de carga dentro de los 7 días después de recibir el depósito; Para la producción, por lo general toma alrededor de 15-30 días después de recibir el depósito.

P: ¿Proporcionan muestras? ¿Son gratuitas o de pago?

R: Las muestras están disponibles de forma gratuita, pero el flete de mensajería será cubierto por la cuenta del cliente.

P: ¿Aceptan la inspección de terceros?

R: Sí, aceptamos inspecciones de terceros.

P: ¿Por qué debería comprarles a ustedes y no a otros proveedores?

R: Integrando los recursos superiores de la industria siderúrgica de China, proporcionamos a los clientes productos de acero de alta calidad a precios preferenciales, y podemos garantizar que las mercancías se entregan a los clientes a tiempo.

P: ¿Cómo garantizan la calidad?

A: Siempre una muestra de pre-producción antes de la producción en masa;Siempre 100% inspeccionado antes del envío